Gregoire Besson SP9 COMPACT, Инструкция по эксплуатации и техническому обслуживанию

Страница: 27 / 108

Operation manual SP 9 - Compact
CHAPTER II – GENERAL SAFETY – Page 13
2.24. PAY ATTENTION TO THE FLUIDS AND GASES UNDER THE
PRESSURE
Because of outflow of fluids under the pressure you can be injured if it
penetrates on your skin or into your eyes.
In order to avoid the accident before the connecting or disconnecting the
hydraulic tubes you must always cease the pressure. That is why after stopping
the tractor and disengaging the plough and putting it on the ground, move the
hydraulic distribution lever from the front – back in order to discharge the oil
from the pressure.
Before the putting the hydraulic system under the pressure examine the units, connecting parts
(joining, tubes, their flexibility) if they are under the suitable conditions.
Wear thick gloves and goggles!.
NEVER try to find leakage with your hand.
Use a stick and wear thick leather gloves.
For the better safety use suitable goggles.
Keep away from any kind of leakage!
If because of any fluid under the pressure you are injured at once to
see a doctor! Any fluid which penetrated onto your skin, remove it as
quickly as possible or it may cause gangrene which leads to
amputation or even death.
Every doctor who do not know this type of injury should turn to the
specialist.
2.25. PRECAUTIONS IN THE CASE OF PLOUGH WITH LARGE
QUANTITY OF RESIDUE OR VEGETATION
If we use the plough on such fields where there is large quantity of stubble residue or vegetation
(corn, green manure) it is important to examine if the bottom pins of the pulling device have been
properly attached and the present of the safety-pin as the corn stems sometimes can tear them
out.
Under such conditions it is recommended to mount the safety-pin protection or use lock bolt or
brake-screws. Connect the GRÉGOIRE-BESSON dealer who can give you good advice.
2.26. PREPARATIONS FOR MAINTENANCE AND SERVICE
o
The machine owner or user is responsible for maintenance.
o
Before every usage examine the equipment and machine blocking system.
o
Systematically examine the connections and tubes condition.
o
Be completely aware of the machine maintenance before you perform any the smallest
intervention.
The instructions about precautions of maintenance and
usage of the machine you can fin din the chapter „Greasing
and maintenance”.