GreenPower Tesseract 5K14, Руководство по установке

Страница: 21 / 63

Figure 4-4 Expansion bolt composition
1. Bolt
2. Nut
3. Spring washer
4. Flat washer
5. Expansion sleeve
•
To prevent dust inhalation or contact with eyes, wear safety goggles and an anti-
dust respirator when drilling holes.
•
Clean up any dust in and around the holes using a vacuum cleaner and measure
the distance between holes. If the holes are inaccurately positioned, drill a new
set of holes.
•
Level the head of the expansion sleeve with the concrete wall after removing the
bolt, spring washer and flat washer. Otherwise, the mounting bracket will not be
securely installed on the concrete wall.
Figure 4-5 Installing an expansion bolt
Step 3 Secure the mounting bracket.
Installing the Tesseract 5K14
Procedure
The Tesseract 5K14 consists of a two-part structure: the main control box
and the battery box. The battery box must be installed before installing
the battery box.
•
To prevent device damage and personal injury, keep balance when moving the
Tesseract 5K14.
•
Do not use the wiring terminals and ports at the bottom to support any weight of
the Tesseract 5K14.
•
When you need to place the Tesseract 5K14 on the ground temporarily, use
foam, paper or other protection material to prevent damage to its cover.