GreenPower Tesseract 5K14, Руководство по установке

Страница: 59 / 63

3
7 Handling the Tesseract 5K14
Removing the Tesseract 5K14
Procedure
Step 1 Power off the system by following the instructions in Section 6.3 Powering Off the
System.
Step 2 Disconnect all cables from the Tesseract 5K14, including signal cables, DC input power
cables, battery cables, AC output power cables and PE cables.
Step 3 Remove all battery packs in the battery box.
Step 4 Remove the wiring of the battery box and the main control box.
Step 5 Remove the main control box from the mounting bracket.
Step 6 Remove the battery box from the mounting bracket.
Step 7 Remove the mounting bracket.
Packing the Tesseract 5K14
If the original packaging is available, put the Tesseract 5K14 inside it and then seal it
using adhesive tape.
If the original packaging is not available, put the Tesseract 5K14 inside a suitable
cardboard box and seal it properly.
Disposing of the Tesseract 5K14
If the Tesseract 5K14 service life expires, dispose of it according to your local disposal
rules for electrical equipment and electronic component waste.