GreenPower Tesseract 5K14, Руководство по установке

Страница: 28 / 63

Installing the Battery Box Cable
Do not connect the negative plug (black) of battery pack #1 until the battery box is
connected to the inverter.
Procedure
Step 1 Insert the DC cable into the battery pack according to the left side of
Figure 5-5. Pay attention to the colour of the plugs. The number on the
cable head corresponds to the number of the battery pack.
Figure 5-5 DC cable installation
Step 2 Insert the communication connector into the communication interface of
each of four battery packs, corresponding by number as shown in Figure
5-6.
Battery pack #1
negative plug