GreenPower Tesseract 5K14, Руководство по установке

Страница: 53 / 63

Usually end users do not need to set the grid parameters. All default values have been set
before leaving factory according to safety rules.
If need to reset, any changes should according to the requirement of local grid. All
parameters are shown below.
I)
Work mode
The default work mode of the inverter is Self-Use mode. User can set the work mode as
Self Use or Force Time Use here as describe in 3.1.
For the Force Time Use. User can set 2 periods of the start and end time of charger or
discharge. Also can select if charging from grid for each charging period.