GreenPower Tesseract 5K14, Руководство по установке

Страница: 55 / 63

L)
Ethernet
Users can set the information about Ethernet here, such as IP address, subnet mask
number, and default gateway number. Press up or down button to select and press
“OK” to confirm.
M)
EPS system
The ESC-Hybrid inverter can work in the EPS mode. Installer can set the EPS parameters
here. “Mute “means you can set the warning of system which has entered EPS mode. “No
“means there will be a buzzing and it is the default value. “Yes “means you choose to
shut down the warning function. Besides, if the buzzing is sharp, it means EPS output
takes over loads. “Frequency “here can be set 50Hz or 60Hz please based on correlative
loads. “Backup setting “here can be set “Battery backup discharge Volt”.End user can
only set the “Mute” and “Frequency” here.
⚫
When you want to use the EPS function, the setting of the discharge cut
voltage need to be higher than the Battery backup discharge Volt.
⚫
The battery backup discharge Volt is the min Voltage of the battery.
1.
In online mode, the discharge cut voltage is 47V. In EPS mode, the battery backup
discharge voltage is 46V.