GreenPower Tesseract 5K14, Руководство по установке

Страница: 56 / 63

2.
You can adjust the discharge cut voltage and the battery backup discharge Voltage or
increase Min capacity to adjust the Capacity for EPS usage in case you have frequently
power cut.
N)
Reset energy
User can reset the energy record here. Press up or down button to select and press”OK”
to confirm.
O)
Reset error logs
User can reset the error log here. Press up or down button to select and press “OK” to
confirm.
P)
Language
User can choose the language “English” or “Deutsch” here. Press up or down button to
select and press “OK” to confirm.
Q)
Self-Test (applies to CEI 0-21 only)
User can test running status of inverter by choosing “Start Test”. It will turn back to
the
Home page automatically and shows “Self-Testing...” 60 seconds later, it will display
“success”, which means self-test completed successfully. Then it will turn back to the
“Test Report” page as below automatically and shows specific parameters.
Note: This section can be displayed and set only when choosing “CEI0-21"in safety
setting.