Graco PrecisionMix ii, Инструкция и перечень запасных частей

Страница: 37 / 260

Installation
3–7
Mounting Components
The controller, color change panel, and fluid panel can
be wall mounted or installed on Part No. 241501 Stand
Mounting Kit. If the Stand Mounting Kit was ordered
with the system, the parts were mounted to the stand
at Graco. The Gun Flush Box can be wall, stand, or
drum mounted in the spray booth.
NOTE:
Refer to Figs. 3.1 and 3.2 for non-hazardous versus
hazardous location equipment requirements.
Refer to Fig. 3.3 through 3.6 for dimensions and
mounting hole layouts.
For Wall Mounting
Mount the components to a wall, as follows:
1. Ensure that the wall and mounting hardware are
strong enough to support the weight of the equip-
ment, fluid, hoses, and stress caused during
operation.
2. Mark the mounting holes on the wall at a conve-
nient height for the operator, using the equipment
as a template.
Color Change Panel: In order to use the
standard supplied fluid hose, the color change
panel must be mounted within 12 in. (305 mm)
of the fluid panel. Contact your Graco distribu-
tor for other available fluid hoses.
Operator Station or Flow Control Station:
Mount the station(s) inside the spray booth, at
a convenient location for the operator to ac-
cess and use.
6 in.
(152 mm)
6.75 in.
(171 mm)
6 in.
(152 mm)
11.75 in.
(298 mm)
Operator Station
(without integrated color change)
8 in.
(203 mm)
6 in.
(152 mm)
Depth: 3.25 in.
(83 mm)
Operator Station
(with integrated color change)
8 in.
(203 mm)
11 in.
(279 mm)
Depth: 3 in.
(76 mm)
9042A
Fig. 3.3
Depth: 3.25 in.
(83 mm)
6 in.
(152 mm)
6.75 in.
(171 mm)
Flow Control Station
6 in.
(152 mm)
8 in.
(203 mm)
Continued on the next page.