Appendix A - I/O Signal Descriptions
24
3A6338F
Red Pump Outlet Pressure
Red Pump Outlet Pressure is a 16bit integer that
represents the outlet pressure on the red pump.
Blue Pump Outlet Pressure
Blue Pump Outlet Pressure is a 16bit integer that
represents the outlet pressure on the blue pump.
Red Pump Inlet Pressure
Red Pump Inlet Pressure is a 16bit integer that
represents the inlet pressure on the red pump.
Blue Pump Inlet Pressure
Blue Pump Inlet Pressure is a 16bit integer that
represents the inlet pressure on the blue pump.
Pump Flow Rate
Pump Flow Rate is a 16bit integer that represents the
current flow rate of the pump.
Active Error Number Requiring
Acknowledgment
See
Appendix D - Error Number Requiring
on page 38.
Active Operator Mode Dispense Flow Rate
Active Operator Mode Dispense Flow Rate is a 16bit
integer that represent the PCL desired flow rate for the
EFR, which is used to override the flow rate of the
operator mode step.
Data Exchange Element Selected
See
on page 27.
Data Exchange Element Value
See
on page 27.
Selected Step of the Active Sequence
See
Appendix C - Sequence Step Data Exchange
on
page 36.
Selected Step Amount
See
Appendix C - Sequence Step Data Exchange
on
page 36.
Selected Step Shot Type
See
Appendix C - Sequence Step Data Exchange
page 36.
Selected Step Flow Rate
See
Appendix C - Sequence Step Data Exchange
page 36.
Selected Step Calibration
See
Appendix C - Sequence Step Data Exchange
page 36.
Total Sequence Amount Requested
Total Sequence Amount Requested is a 32bit integer
that represent the amount requested by the EFR during
the active sequence. This integer will only be populated
after the active sequence finishes dispensing.
Total Sequence Amount Requested
Total Sequence Amount Dispensed is a 32bit integer
that represent the amount dispensed by the EFR during
the active sequence. This integer will only be populated
after the active sequence finishes dispensing.
