Available Internal Data
3A6338F
13
CGM General Timing Diagrams
NOTE:
A 50ms delay is suggested between each CGM signal.
NOTE:
In the diagrams shown below, the ID# corresponds to the Instance ID in the Automation Inputs and Outputs
table.
When the Priming Request bit is ON, the EFR will start priming as long as the System On bit is also ON. If the
System On bit or the Priming Request bit is OFF, the EFR will stop priming.
Automation Inputs (EFR Outputs)
System On
System Ready
Alarms Present
Deviations Present
Advisories Present
System is Priming
Dispensing Valve Open
Automation Outputs (EFR Inputs)
System Enabled Request
Priming Request
EFR State
Priming Running
Key
EFR is Priming
EFR Gateway Run Smart Priming
