English
Clamp Multimeter METRACLIP 86
1.1
THE SWITCH
The switch has six positions. To access the
,
,
,
,
, functions,
set the switch to the desired function. Each setting is confirmed by an audible
signal. The functions are described in the table below.
Figure 2 : the switch
Item
Function
See §
1
OFF mode – Switches the clamp multimeter off
2
AC, DC, AC+DC voltage measurement (V)
3
Continuity test
Resistance measurement Ω
Diode test
4
AC, DC, AC+DC current measurement (A)
5
Power measurements (W, var, VA) and calculation of the
power factor (PF) AC, DC, AC+DC
6
Indicator of the order of the phases
1
2
3
4
5
6
9