English
Clamp Multimeter METRACLIP 86
The measured value is displayed on the screen.
3.6
CONTINUITY TEST
Warning :
Before performing the test, make sure that the circuit is off and any
capacitors have been discharged.
1.
Set the switch to
; the
symbol is displayed ;
2.
Connect the black lead to the COM terminal and the red lead to «+».
3.
Place the test probes or the crocodile clips on the terminals of the
circuit or component to be tested.
An audible signal is emitted if there is continuity, and the measured value is
displayed on the screen.
23
