English
Clamp Multimeter METRACLIP 86
The measured value is displayed on the screen.
3.13.2 Frequency measurement in current
1.
Set the switch to
and press the
key. The
Hz
symbol is
displayed.
2.
Select AC or AC+DC by pressing the yellow
key until the desired
choice is reached.
3.
Encircle only the conductor concerned with the clamp.
The measured value is displayed on the screen.
3.13.3 Measurement of frequency in power
In the single-phase AC or AC+DC Power (W) setting, it is possible to display the
frequency of the voltage of the signal on the terminals.
In the balanced three-phase AC or AC+DC Power (W) setting, it is possible to
display the frequency of the phase-to-phase voltage of the signal on the terminals.
31
