Clamp Multimeter METRACLIP 86
English
Successive presses
on
… serve
short
-to activate detection of the MAX/MIN/PEAK values
-to display the MAX, MIN, PEAK+ or PEAK- value successively
-to return to display of the present measurement without exiting
from the mode (the values already detected are not erased)
Remark:
the MAX, MIN, PEAK+, PEAK- symbols are both displayed, but
only the symbol of the quantity selected blinks.
Example: If MIN has been selected, MIN blinks and MAX, PEAK+, PEAK-
are lit steadily.
-to activate detection of the MAX/MIN values
-to display the MAX or MIN value successively
-to return to display of the present measurement without exiting
from the mode (the values already detected are not erased)
long (> 2 sec)
to exit from the MAX/MIN/PEAK mode. The values previously
recorded are then erased.
Remark:
if the HOLD function is activated, it is not possible to exit from
the MAX/MIN/PEAK mode. The HOLD function must first be de-activated.
Remark :
ΔREL function can be used with the functions of the MAX/MIN/PEAK
mode.
2.4.2
The MAX/MIN/PEAK mode + activation of the HOLD mode
Successive presses
on
… serve
short
to display successively the MAX/MIN/PEAK values
detected before the
key was pressed.
Note
: the HOLD function does not interrupt the acquisition of new MAX, MIN,
PEAK values.
16
