Glasair Sportsman GS-2 Скачать руководство пользователя

Страница: 59 / 216

ORMAL

PERATING

ROCEDURES

EVISION

ATE

12/29/04

AGE



20. Check left-side wing-fold hatch for security.

21. Check external antennae, if any, for security and integrity.

F. LEFT WING TRAILING EDGE AND CONTROL SURFACES:

1. Check wing strut integrity and security at both ends.

2. Fuel sump: drain fuel into clear cup and check for water and

debris. Drain until water or debris is gone.

3. Check inspection hole covers for security.

4. Check upper and lower main wing skins for cracks, dents and

loose rivets.

5. Check flap pushrod for security, integrity and freedom.

6. Check flap tracks and flap track bearings for security, integrity

and free movement.

7. Check flap skins for cracks, dents and loose rivets.

8. Check aileron pushrod for security, integrity and freedom.

9. Check aileron hinges for security, integrity and free movement.

10. Check aileron skins for cracks, dents and loose rivets.

11. Check aileron counterweight for security, integrity and

freedom from obstruction (e.g., loose wires in wingtip).

G. LEFT-SIDE WING LEADING EDGE AND FUEL TANK:

1. Check security and integrity of wingtip fairing and nav/strobe

lights.

2. Remove wingtip fuel vent plug, if present, and check vent line

for other obstructions. (Use a length of 1/4" I.D. tubing to

blow into vents.)

3. Aux fuel sump: drain fuel into clear cup and check for water

4. Check security and integrity of delta wings.

Содержание Sportsman GS-2




































































































































































































Результаты поиска

Содержание Sportsman GS-2

Отзывы:

Похожие инструкции для Sportsman GS-2

Бренды по названию

Популярные бренды

Glasair Sportsman GS-2, Руководство пользователя

Результаты поиска

Содержание Sportsman GS-2

Отзывы:

Похожие инструкции для Sportsman GS-2

Бренды по названию

Популярные бренды