R
EVISION
:
-
D
ATE
:
12/29/04
P
AGE
:
12
Copyright
2004 Glasair Aviation, LLC Arlington, Washington All rights reserved
You should have the following documents ready for the inspector:
1. Application for Airworthiness Certificate, FAA form 8130-6.
2. Enough data (such as photographs or a 3-view drawing) to identify
the aircraft.
3. An Aircraft Registration Certificate, AC Form 8050-3, or the pink
copy of the Aircraft Registration Application, AC Form 8050-1.
4. A statement setting forth the purpose for which the aircraft is to be
used; i.e. “Operating an amateur-built aircraft.” The statement
should include the estimated duration of the test period and the
areas over which the test will take place.
5. A notarized statement that the applicant fabricated and assembled
the major portion of the aircraft for education or recreation and
has the evidence to support the statement available to the FAA
upon request. A construction log maintained by the builder,
including photographs taken as major components are completed,
will be acceptable verification that the builder constructed the
major portion of the aircraft.
6. Weight and balance data.
7. An aircraft log book with evidence of inspections, such as log book
entries signed by the builder describing all inspections conducted
during construction of the aircraft. This will verify that the
construction has been accomplished in accordance with acceptable
workmanship methods, techniques and practices.