R
EVISION
:
-
D
ATE
:
12/29/04
P
AGE
:
26
Copyright
2004 Glasair Aviation, LLC Arlington, Washington All rights reserved
K. Check for loose hardware and tools in the fuselage and tail areas.
L. Vacuum the cockpit area. Clean the windshield and the canopies.
M. Reinstall the interior panels, the tail fairings and the landing gear
fairings.
7-8.4 W
INGS
A. Remove all inspection covers and the wingtip fairings.
B. Check the wing attach pins, bolts and fittings for security, integrity
and safety.
C. Check the wing and control surface skins for cracks, dents,
corrosion and loose rivets.
D. Check the wingtip fairings for cracks and stress marks.
E. Check all wiring and plumbing for chafing and security.
F. Check all aileron and flap control cables, pushrods, rod-ends,
bellcranks and hinges for corrosion, safety, security and chafing.
Lubricate pivot points and bearing surfaces as necessary.
G. Check the ailerons for proper travel: 22.5° (±2.5°)up and 17.5°
down (±1°).
H. Make sure the flap guide-arm bearings contact the ends of the flap
track slots in the fully retracted and extended flap positions. Check
the roller bearings for wear and replace if necessary.
I. Inspect the aileron counterweights for integrity, security and
chafing. (Be sure any wiring in the wing tips cannot jam the aileron