H
ANDLING
, S
ERVICE AND
M
AINTENANCE
R
EVISION
:
-
D
ATE
:
12/29/04
P
AGE
:
21
Copyright
2004 Glasair Aviation, LLC Arlington, Washington All rights reserved
2. Alternator output.
3. Left magneto drop.
4. Right magneto drop.
5. Prop control and governor action.
6. Suction gauge.
7. Static r.p.m.
8. Idle r.p.m.
9. Carburetor heat.
10. Magneto ground.
11. Mixture cut-off r.p.m. rise at idle.
12. After engine shut-down, check for oil leaks.
13. Reinstall the lower cowling and check the operation of the
landing light.
7-8.2 C
ABIN
, F
USELAGE AND
E
MPENNAGE
Remove the glare shield, forward and aft control cable covers, seat
pans, baggage compartment bulkhead, baggage shelf, tail fairings,
horizontal stabilizer and forward and aft inter-bulkhead shearwebs, as
necessary. Inspect the following:
A. Inspect the control system cables, pulleys, pushrods and rod-end
bearings for corrosion, safety, security and chafing. Lubricate all
pivot points, bearing surfaces and pulleys as necessary. Check the
following systems:
1. Aileron system.