USER MANUAL
POSITION CONTROLLER THESI 310
MT02_A37_A_TH310_GIVI_ENG rev. E
Pag. 34/44
When switched on, the position controller sets itself for manual operation and only the axis
display turns on.
In this operating mode, the axis movement can be controlled with the following keys:
SLOW FEED AXIS MOVEMENT
SLOW BACK AXIS MOVEMENT
FAST FEED AXIS MOVEMENT
FAST BACK AXIS MOVEMENT
Note:
If, during movement, the programmed minimum or maximum measuring length limits are
overcome, the axis stops and the led of the START key begins to flash. This indicates the
overcoming of limits due to low or high speed inertia.
Press the STOP key to cancel the signaling.
MANUAL OPERATION
