USER MANUAL
POSITION CONTROLLER THESI 310
MT02_A37_A_TH310_GIVI_ENG rev. E
Pag. 12/44
Parameter 24
– MM/INCH CONVERSION
Parameter 25
– SELECTING “POSITION WITH ACC./DEC. RAMPS” OPTION
Parameter 26
– SETTING OF ACCELERATION TIME
Parameter 27
– SETTING OF DECELERATION TIME
Parameter 80
– PARAMETERS’ ACCESS PASSWORD MODIFICATION
Parameter 89
– INSTRUMENT DIAGNOSTICS
Parameter 90
– RESERVED
Example of parameter selection
P --
Press
for 2 seconds. The display will
show:
0 0 0 0 0 0*
P --
Press
if the current password is the
one set by the Manufacturer
0 0 0 0 0 0*
or enter the selected password (see parameter 80).
P 01
Confirm with
key
the display will show the value of
the first parameter, e.g.
1 2 0.0
P 02
Press
to select the desired parameter,
e.g.
d i r -
Note: in this phase, it is possible to use also keys 2 and 4 to select parameters more
easily.
P 02
Press
to confirm the selection and
enter its settings
d i r -*
Set the parameter’s configuration, following the instructions provided below.
P 02
Press
to confirm the value and go back
to parameters selection
d i r -
P 03
Press
to select another parameter, e.g.
1.0 0 0 0 0
Or press
to quit configuration and go back
to the position display
1 2 0.0
)
AT ANY TIME, IT IS POSSIBLE TO QUIT THE PARAMETERS SETTING, BY
PRESSING THE STOP KEY.
