USER MANUAL
POSITION CONTROLLER THESI 310
MT02_A37_A_TH310_GIVI_ENG rev. E
Pag. 21/44
Parameter 16
– SETTING OF WAITING TIME FOR DEVIATION
With this parameter, it is possible to set the waiting time after the closure of the input,
before deviation begins. The value is expressed in seconds.
Example of value setting = 0.60 seconds
P 16
Press
to select the parameter
(see PARAM. SELECTION)
0.0 0
P 16
Press
to confirm the selection and
enter its settings
0 0 0 0.0 0*
Enter the desired value and align it to the decimal point displayed.
P 16
Press
to confirm the value and go back
to parameters selection
0.6 0
Press
to quit configuration and go back
to the position display
2 0 0.0
Parameter 17
– SETTING OF WAITING TIME FOR CHECKING POSITIONING
With this parameter, it is possible to set the waiting time between a shift and the correct
positioning check. The value is expressed in seconds.
Example of value setting = 0.50 seconds
P 17
Press
to select the parameter
(see PARAM. SELECTION)
0.0 0
P 17
Press
to confirm the selection and
enter its settings
0 0 0 0.0 0*
Enter the desired value and align it to the decimal point displayed.
P 17
Press
to confirm the value and go back
to parameters selection
0.5 0
Press
to quit configuration and go back
to the position display
2 0 0.0
