USER MANUAL
POSITION CONTROLLER THESI 310
MT02_A37_A_TH310_GIVI_ENG rev. E
Pag. 28/44
Example of value setting = 0.70 seconds
P 27
Press
to select the parameter
(see PARAM. SELECTION)
0.0 0
P 27
Press
to confirm the selection and
enter its settings
0 0 0 0.0 0*
Enter the desired value and align it to the decimal point displayed.
P 27
Press
to confirm the value and go back
to parameters selection
0.7 0
Press
to quit configuration and go back
to the position display
2 0 0.0
Parameter 80
– PARAMETERS’ ACCESS PASSWORD MODIFICATION
The default password set by the Manufacturer is “000000”.
The password can be modified, to make parameters’ configuration accessible only to
authorized personnel.
Example of setting
P 80
Press
to select the parameter
(see PARAM. SELECTION)
0 0 0 0 0 0
P 80
Press
to confirm the selection and
enter its settings
0 0 0 0 0 0*
Enter
the
current
password.
P 80
Press
after having entered the value.
The following message will be
displayed for 1 second.
S E t
Enter the
new
password to be used.
P 80
Press
to confirm the value and go back
to parameters selection
0 0 0 0 0 0
Press
to quit configuration and go back
to the position display
2 0 0.0
