USER MANUAL
POSITION CONTROLLER THESI 310
MT02_A37_A_TH310_GIVI_ENG rev. E
Pag. 22/44
Parameter 18
– SELECTING “POSITION IF WITHIN TOLERANCE” OPTION
This parameter allows to enable/disable the possibility of positioning again, even when the
current position is within the tolerance range.
Example of selection: enabling
P 18
Press
to select the parameter
(see PARAM. SELECTION)
n o
P 18
Press
to confirm the selection and
enter its settings
n o*
P 18
Press
to choose the desired selection
y E S*
P 18
Press
to confirm and go back to
parameters selection
y E S
Press
to quit configuration and go back
to the position display
2 0 0.0
Parameter 19
– SELECTING “SPEED CHANGE WITHOUT STOPPING” OPTION
This parameter allows to enable/disable the possibility of changing the speed from fast to
slow without stopping the axis movement.
Example of selection: enabling
P 19
Press
to select the parameter
(see PARAM. SELECTION)
n o
P 19
Press
to confirm the selection and
enter its settings
n o*
P 19
Press
to choose the desired selection
y E S*
P 19
Press
to confirm and go back to
parameters selection
y E S
Press
to quit configuration and go back
to the position display
2 0 0.0
