Gilson PLC 2050, Руководство пользователя

Страница: 40 / 132

40 inStaLLation | PLC 2050/2250/2500 PurifiCation SyStemS
p
L
a
C
e
th
e
S
O
Lv
e
N
t
B
O
t
t
Le
t
r
a
y
Purge Valve Outlet Tubing
the purge valve outlet tubing (Pn 21040168) connects the pump valve outlet to a waste
reservoir. there is an SS fitting at one end and an SS ballast on the other end.
Connect the tubing to the purge valve outlet, tighten the SS nut with a 3/8” spanner, and then
place the other end into suitable waste receptacle.
Sample Loop
NOTE
Most PLC Purification Systems come with the sample loop pre-installed at the factory; however, for
custom orders, please follow the instructions below.
to make the sample loop connection:
● Connect a sample loop to Port 3 and Port 6 of the automatic loop injection valve.
●
Connect a sample loop to Port 1 and Port 4 of the manual loop injection valve. the manual
loop injection valve is mounted on a bracket on the left side of the system.
NOTE
The sample loop must be equipped with SS nuts for 1/8” tubing (5/16"-24 UNF model) and SS
ferrules for 1/8” tubing. Use a 3/8” or 5/16” spanner to tighten the nuts and properly crimp the
ferrules.
Figure 29
Purge Valve outlet
Purge Valve outlet Purge tubing