Gilson PLC 2050, Руководство пользователя

Страница: 16 / 132

16 introDuCtion | PLC PurifiCation SyStemS
U
N
pa
C
K
Unpacking List
the following items are considered standard equipment and are provided with
the PLC Purification Systems. for detailed descriptions and part numbers, refer to
Replacement Parts and Accessories on page 81 .
StaNDarD eQUIpMeNt
pLC 2050 and pLC 2250
●
inlet/suction, 1/8" (oD), 2.4 mm (iD), 2 m (qty. 2)
○ etfe or Ptfe with a 20 cm spring at one end and an SS ballast at the other, and with
colored cable ties for identification
○ PeeK nuts and etfe ferrules for 1/8” tubing
●
Waste outlet, 1/8" (oD), 1.6 mm (iD), 2 m (qty. 1)
○ etfe or Ptfe with an SS ballast at one end
○ SS fitting and PeeK nut and etfe ferrule for 1/8” tubing
pLC 2500
● inlet/suction, 3/16" (oD), 1/8" (iD), 2 m (qty. 2)
○
Pfa with an SS ballast at one end with colored cable ties for identification
○ PeeK nuts and etfe ferrules for 3/16” tubing
● Waste outlet, 1/8" (oD), 2.4 mm (iD), 2 m (qty. 1)
○
etfe or Ptfe with an SS ballast at one end
○ SS fitting and PeeK nut and etfe ferrule for 1/8” tubing
all pLC purification Systems
●
additional collection probes (qty. 2)
○ etfe Luer male-to-1/4”-28 (tPi) male
○ SS probe for 150 mm tubes (6.5 cm)
● Cleaning discs fittings (qty. 2)
○ PeeK nuts and etfe ferrules for 1/8” tubing
●
Column connections
○ SS or PeeK tubing, 1 m, 1/8” or 1/16” (oD), 2.1 or 1 or 0.75 mm (iD) for column inlet
○ etfe or Ptfe tubing, 1 m, 1/8” or 1/16” (oD), 1.6 or 1 mm (iD) for column outlet
○
SS fittings for 1/8” or 1/16” tubing (qty. 4)
● Column clamp (qty. 1)
○ for columns up to 40 mm (oD)
○ 3 mm allen wrench
● Detector test cell for service (qty. 1)
●
Gradient valve to pump heads tubing assembly (qty. 1)
○ etfe or Ptfe, 1/8” (oD), 2.4 mm (iD) with springs
○ PeeK nuts and etfe ferrules for 1/8” tubing
○ tee union