Gilson PLC 2050, Руководство пользователя

Страница: 18 / 132

18 introDuCtion | PLC PURIFICATION SYSTEMS
U
N
pa
C
K
● integrated eLS Detector
○ SeDeX fP™ nebulizer
○
Glassware nebulization chamber
○ Chamber shield
○ accessory kit:
○
Splitter tubing (PeeK), 1/16” (oD), 0.005” (iD), 35 cm, with PeeK fittings, and PeeK
union 10-32
► Gas tube (Pa), 6mm (oD), 3 m
► Gas tube (Pu), 4 mm (oD), 23 cm
► Drain tube assembly (including SS fitting and Ptfe seal)
► 2 adjustable releasable clips for black exhaust tube
○
Gas regulator with 5 µm filter (ordered separately):
► manometer
► fittings
► Set of two side mounting brackets
● Loop injection valve, automatic (qty. 1)
○ 6-way, 2-position electric valve for 1/8” tubing, special screws, and cable
○ Control module, power supply, bracket, and cables
○ tubing kit 1 mm (iD) (PLC 2050) or 2.1 mm (iD) (PLC 2250 and PLC 2500)
●
Quaternary gradient system 1/8” (PLC 2050 and PLC 2250) or 3/16” (PLC 2500) (qty. 1)
○ 4-way gradient valve
○ inlet/suction tubing with fittings (qty. 4)
aftermarket Options
● acquisition module for external detectors (qty. 1)
○ uSB cable (qty. 1)
○ uSB drive with drivers and installation procedure (qty. 1)
● Loop injection valve, manual (qty. 1)
○
6-way, 2-position manual valve for 1/8” tubing, and bracket
○ tubing kit 1 mm (iD) (PLC 2050) or 2.1 mm (iD) (PLC 2250 and PLC 2500)
○ Hardware and installation procedure
○
accessory kit
► Large-bore syringe needle (qty. 1)
► needle port cleaner (qty. 1)
► allen wrenches (qty. 2)
► open-end spanner, 1/4”—5/16” (qty. 1)
►
operating instructions (qty. 1)