Gilson PLC 2050, Руководство пользователя

Страница: 105 / 132

105 PLC 2050/2250/2500 PurifiCation SyStemS | uSer’S GuiDe
p
LC
W
iT
H
M
S
d
e
T
e
C
TO
R
C
O
n
F
iG
U
R
A
Ti
O
n
Setup
Set up the mS detector adjacent to the PLC Purification System. the unit must be installed on
a lab bench with the miDas positioned along the edge of the lab bench to provide space for
the gutter and drain tube. the miDas can be stacked on top of the mS detector.
CAUTION
Allow sufficient spacing around the VeRiTY 1910 MS detector for proper cooling and for
the connection of mains plug, gas inlets, syringe pump, HpLC etc.
The VeRiTY 1910 MS detector is too heavy to be lifted or moved by one person
safely. To avoid personal injury and for general safety, if moving or lifting the
VeRiTY 1910 MS detector, always get another person to assist you. Always follow local
health and safety regulations.
The maximum weight that can be supported by the VeRiTY 1910 MS detector is 132 lbs.
(60 kg).
Connect the drain tube to the outlet on the gutter provided with the miDas. Place the
front feet of the miDas through the holes in the gutter. Stack the miDas with gutter on
the Verity 1910 mS Detector. align the rear panel of the miDas with the rear panel of the
Verity 1910 mS Detector. Place the optional keyboard and mouse on the lab bench or on top
of the miDas.
Figure 78
Placement of PLC Purification System with Stacked Verity® 1910 mS Detector
and miDas™
pLC purification System
VeRiTY 1910
MS detector
Midas™
Gutter
drain
Tube