Gilson PLC 2050, Руководство пользователя

Страница: 37 / 132

37
PLC 2050/2250/2500 PurifiCation SyStemS | uSer’S GuiDe
p
L
a
C
e
th
e
S
O
Lv
e
N
t
B
O
t
t
Le
t
r
a
y
tUBING CONNeCtIONS aND COMpONeNtS DIaGraM
refer to the following diagram and table before connecting the inlet tubing.
Standard Equipment
PLC 2050 and 2250
Tubing and Fittings
Inlet/Suction, 2 m (qty. 2)
Ethylene tetrafluoroethylene (ETFE) or Polytetrafluoroethylene (PTFE), 1/8” OD, 2.4 mm ID with a 20 cm spring at one end and with a stainless steel (SS) ballast at the other, and with colored cable ties for identification
Polyether ether ketone (PEEK) Nuts and ETFE Ferrules for 1/8” OD tubing
Waste Outlet, 2 m (qty. 1)
ETFE or PTFE, 1/8” OD, 1.6 mm ID with a SS ballast at one end
SS Fitting and PEEK Nut and ETFE Ferrule for 1/8” OD tubing
PLC 2500
Tubing and Fittings
Inlet/Suction, 2 m (qty. 2)
Perfluoroalkoxy alkane (PFA), 3/16” OD, 1/8” ID with a stainless steel (SS) ballast at one end, and with colored cable ties for identification
PEEK Nuts and ETFE Ferrules for 3/16” OD tubing
Waste Outlet, 2 m (qty. 1)
ETFE or PTFE, 1/8” OD, 2.4 mm ID with a SS ballast at one end
SS Fitting and PEEK Nut and ETFE Ferrule for 1/8” OD tubing
All PLC Purification Systems
Tubing and Fittings
Purge Valve Outlet, 1.5 m (qty. 1)
ETFE or PTFE, 1/8” OD, 1.6 mm ID with a SS ballast at one end
SS Fitting and PEEK Nut and ETFE Ferrule for 1/8” OD tubing
Gradient Valve to Pump Heads Tubing Assembly (qty. 1)
ETFE or PTFE, 1/8” OD, 2.4 mm ID with springs
PEEK Nuts and ETFE Ferrules for 1/8” OD tubing
Tee union
Cleaning Discs Fittings (qty. 2)
PEEK Nuts and ETFE Ferrules for 1/8” OD tubing
Loop Connection Fittings (unless the loop already supplied) (qty. 2)
SS Nuts and SS Ferrules for 1/8” OD tubing
Column Connections (qty. 4)
SS or PEEK Tubing, 1 m, 1/8” or 1/16” OD, 2.1 or 1 or 0.75 mm ID for Column Inlet
ETFE or PTFE Tubing, 1 m, 1/8” or 1/16” OD, 1.6 or 1 mm ID for Column Outlet
SS Fittings for 1/8” or 1/16” OD tubing
Accessories
All PLC Purification Systems
Column Holder (qty. 1)
Tightening Clamp for up to 40 mm OD columns
Allen wrench 3 mm
Detector Test Cell (for service) (qty. 1)
Rack Set (qty. 1)
Three SS racks, 18 x 150/80 mm for 18 mm diameter tubes
Additional Collector Needles (qty. 1)
ETFE Luer Male-to-1/4”-28 TPI, Male
SS Needle for tubes 150 mm high (6.5 cm)
Positioning Guide for Placing Short Racks
Solvent Bottle Tray
USB Drive
Documentation
Control Software Installation File
Stylus
Adhesive Holder
M3 Fixing Screw
Power Cord (model based on destination country)
Documentation
PLC 2050/2250/2500 Purification Systems User’s Guide
Gilson Glider Prep Software User’s Guide
UV/VIS Detector Service Guide
Optional Accessories
Factory Options
Quaternary Gradient System 1/8” OD (PLC 2050 and PLC 2250) or 3/16" OD (PLC 2500)
Gradient Valve with Four Inlets (Standard Valves have Two Inlets) (qty. 1)
Inlet/Suction Tubing with Fittings (qty. 4)
Loop Injection Valve (Automatic)
6-way, 2-position Electric Valve for 1/8” OD Tubing, Special Screws, and Cable (qty. 1)
Control Module, Power Supply, Bracket, and Cables (qty. 1)
Tubing Kit, 1 mm ID (PLC 2050) or 2.1 mm ID (PLC 2250 and PLC 2500) (qty. 1)
Backflush Valve (Automatic)
4-way, 2-position Electric Valve for 1/8” OD Tubing, Special Screws, and Cable (qty. 1)
Control Module, Power Supply, Bracket, and Cables (qty. 1)
Tubing Kit, 1 mm ID (PLC 2050) or 2.1 mm ID (PLC 2250 and PLC 2500) (qty. 1)
Column Switching Valve (Automatic)
6-way, 2-position Electric Valve for 1/8” OD Tubing, Special Screws, and Cable (qty. 1)
Control Module, Power Supply, Bracket, and Cables (qty. 1)
Tubing Kit, 1 mm ID (PLC 2050) or 2.1 mm ID (PLC 2250 and PLC 2500) (qty. 1)
A B C D
E
F
H
F
K
A11
B11
C1
D1
G
F
M
N
K
L
Figure 26
Component and Connection Diagram for the Gradient Valve and Waste tubing
Left Side
Gradient (Solvent)
reservoirs
Waste