Gilson PLC 2050, Руководство пользователя

Страница: 32 / 132

32
introDuCtion
|
PLC 2050/2250/2500 PurifiCation SyStemS
De
ta
IL
e
D
De
SC
r
Ip
tI
O
N
COLLeCtION prOBeS
Different models of collection probes can be connected to the dispense head of the fraction
collector. the installed probe is SS, 35 mm (Pn 21040159). a second probe, SS, 65 mm is
supplied to collect fractions in 150 mm high tubes. an additional probe is available, which is
shorter, but with a smaller outlet diameter for a fine and accurate dispense.
Back Pressure Regulator
an in-line back pressure regulator 20 psi (1.4 bar) (Pn 49041121) is mounted on the collector
inlet tubing to prevent air bubbles in the detector flow cell.
Racks
the integrated collector is provided with three SS racks (standard, Pn 21040019) designed
for 18 mm diameter tubes, accommodating up to 192 tubes and a maximum volume of 6.1 L.
refer to
Fraction Collector on page 84 for a complete list of rack options.
Touchscreen PC
the system is controlled by a touchscreen
PC, which allows the user to create methods
and run the instrument. Seven uSB ports
are available, two in the front of the system,
below the screen, four on the right side, and
one more on the left side of the instrument.
uSB cables and all other external connections
should not exceed two meters (6.5 ft.).
additional Probe
(etfe Luer male-
to-1/4”-28 female)
Standard
Dispense
Probe
Figure 18
Collector Probes
Figure 19
touchscreen PC
Power
indicator Light
Stylus
touchscreen
uSB
Ports
uSB
Ports