General Monitors TS4000H, Инструкция по эксплуатации

Страница: 100 / 105

TS4000H
92
9.7 Parts and Accessories
Replacement boards for the TS4000H Base Unit are available directly from General Monitors.
The Interface Module, however, is a fully encapsulated device and consequently has no
replaceable parts. The part number for various TS4000H parts and accessories is listed below:
NOTE:
The TS4000H ships with a Base Unit, Interface Module, and specified electrochemical
cell. Detection of the various gases detailed in Table 39 is achieved by hot swapping
the chosen electrochemical cell into the TS4000H.
TS4000H Part Number
Base Unit
46066
Interface Module
46100
Sensor Cap
45103-1
Replacement O-Ring for Sensor Assembly
925-5030
Selection Magnet
30060-1
Screwdriver
10450-1
5 mm Allen Wrench
954-014
Table 46: TS4000H Part Numbers
Gas Type Range Part Number
Ammonia (NH
3
) 0 - 50 ppm
45186-6
Ammonia (NH
3
) 0 - 100 ppm
45186-6
Carbon Monoxide (CO) 0 - 100 ppm
45123-3
Carbon Monoxide (CO) 0 - 500 ppm
45123-3
Chlorine (Cl
2
) 0 - 10 ppm
45123-2
Chlorine (Cl
2
) 0 - 20 ppm
45123-2
Chlorine Dioxide (ClO
2
) 0 - 3 ppm
45123-1
Hydrogen (H
2
) 0 - 500 ppm
45186-12
Hydrogen Chloride (HCl) 0 - 20 ppm
45123-4
Hydrogen Sulfide (H
2
S) 0 - 20 ppm, 0 - 50 ppm
45186-10
Hydrogen Sulfide (H
2
S) 0 - 100 ppm
45186-11
Nitric Oxide (NO) 0 - 100 ppm
45123-7
Nitrogen Dioxide (NO
2
) 0 - 20 ppm
45123-8
Oxygen (O
2
), -40 °C 0 – 25% v/v
45249-1
Oxygen (O
2
), -20 °C 0 – 25% v/v
45213-1
Sulfur Dioxide (SO
2
) 0 - 20 ppm, 0-100 ppm
45123-9
NOTE:
Consult the manufacturer’s documentation for information on the shelf life of the
various electrochemical cells.
Table 47: Replacement Sensors