General Monitors TS4000H, Инструкция по эксплуатации

Страница: 24 / 105

TS4000H
16
3.4.2 Mounting – Local Configuration
Local configuration refers to the configuration where the Base Unit and Interface Module are
placed in the same location. This is commonly referred to as a stand-alone configuration.
Figure 5: Local Configuration Diagram
Before mounting, review the following:
Detection Location Guidelines listed in Section 3.2.2.
Environmental Specifications listed in Section 9.5.
To Mount the TS4000H – Local Configuration
1. Mount the TS4000H Base Unit vertically to reduce the possibility of dirt and dust building
up on the window.
2. Ensure the open slots of the gas passage are straight up and down to enable the gas to
rise up and through the electrochemical cell.
3. Using the two bolt holes, mount the TS4000H Base Unit to a stable surface or wall.
NOTE:
Duct Mounting Kits are available from General Monitors. For more information, contact
General Monitors Customer Support. For contact information, refer to Section 8.0.