6. Control Functions and Parameter Settings
6-4
Monitor parameters list
Application
No.
Parameter
Unit
Remarks
ST
V/f VEC PM
D11 – Torque setting
0
Torque setting
%
The currently selected torque setting is displayed.
1
Analog torque setting
%
The setting value from the analog torque input is displayed.
2
Serial communication
torque setting
%
The setting value from the serial communication torque input
setting is displayed.
3
Operation panel torque
setting
%
The torque set with the operation panel (B13-0) is displayed.
4
ASR output
%
The ASR output is displayed.
5
Torque setting (after
torque limiter function)
%
The forward run direction torque is displayed with the (+)
polarity, and the reverse run direction torque with the (–)
polarity.
D12 – Slip
0
Slip
%
The slip is displayed as a percentage in respect to the base
speed.
D20 – Extended monitor
0
Fault history reading entry
The last four fault history will display when SET is pressed.
2
Non-default value
parameter list mode entry
The parameters that differ from the default factory settings are
displayed when key SET is pressed.
D21 – Maintenance monitor
0
Cumulative Power On
time
Hrs
Displays the cumulative power ON time.
1
Cumulative run time
Hrs
Displays the cumulative run time.
2
CPU version
Display the CPU serial number.
3
ROM version
Display the ROM serial number.
D22 – Automatic tuning
0
Automatic tuning
progression display
Displays the progression of the automatic tuning.
D30 – Hardware monitor
0
Inverter type
This indicates the inverter type
1
Option PCB
This indicates the mounted optional PCB.
The correspondence of the LED signals is shown below
R e la y interface
P C in terface
S e ria l interface
S p ee d de te ctio n 3 (for P M)
S p ee d de te ctio n 1 a nd 2 (fo r IM )
A n alog inte rfa ce
Tra ce B ack In terface
P ro fibu s Interface
Option PCB monitor (D30-1)
