Logging Data
8-1
April 2009
Chapter 8
Logging Data
A powerful and flexible feature of the PT878GC is data logging.
The meter enables you to choose up to 12 parameters to log. You
can also select the start time and date, end time and date, and time
interval. Logs can run one at a time or simultaneously. Error and
circular logs are also available. The logged data is internally
stored in battery-backed-up memory. A fixed amount of memory
is assigned to data logging. The frequency of the time interval,
the length of the log run, and the number of logs affect the
amount of memory required for a particular log. For example, a
log that records every 5 seconds will use up more memory than a
log that records every 5 minutes for a given amount of time. Once
you make your data logging selections, the PT878GC enables you
to view the amount of memory left. You may also stop logging or
view logged data while or after data is logged.
This section describes:
•
How to enter the Logging Menu.
•
How to set up a new log.
•
How to view the data logger memory.
•
How to start, stop or pause logging
Содержание TransPort PT878GC
Страница 1: ...GE Sensing Inspection Technologies TransPort PT878GC Portable Gas Flowmeter User s Manual ...
Страница 29: ...Initial Setup 2 13 April 2009 Keypad cont Figure 2 7 The TransPort PT878GC Keypad ...
Страница 208: ...April 2009 9 4 Servicing the PT878GC Printing Reports cont Figure 9 3 Printout of a Typical Drive Report ...