GE PanaFlow HT, Руководство пользователя

Страница: 78 / 163

Chapter 3. Initial Setup and Programming
68 PanaFlow HT User’s Manual
3.7.3e Setting the Control Output (cont.)
To check and/or change the control value, in the
Control Output
menu, select
Control Value
and press
[

]
. A screen similar to the following appears.
Press
[

]
again, and a screen similar to the following displays the threshold value
to activate.
Use the [

] or [

] arrow key to change the
Control Value
setting. Press
[

]
to
save the number and press
[

]
to return to the previous screen.
Note:
The units that appear will be the units selected in “Flow Units” on
page 43.
To test the actuator, in the
Control Output
menu select
Test Control
and press
[

]
.
A screen similar to the following appears.
To begin testing, select
ON
and press
[

]
. To stop testing, select
OFF
and press
[

]
.
Press [

]
to return to the
Control Output
menu.
Note:
Be sure to select
OFF
when you end the test.
0