GE PanaFlow HT, Руководство пользователя

Страница: 49 / 163

PanaFlow HT User’s Manual 39
Chapter 3. Initial Setup and Programming
3.5.5 Program
IMPORTANT:
The measurement will stop and the SIL output will go to dangerous detected level (error level) when you
enter Program (configure) mode.
Figure 27: Warning Screen for SIL
3.5.5a Enter Programming
To enter the
Programming
menu, on the
Display/Lockout
menu, use the arrow
keys to highlight
Programming
and press
[

]
.
The following screen appears.
3.5.5b Access Levels
There are four levels of information access:
General
,
SIL
,
Service
and
Factory
.
Each level requires that a password be entered. Use the arrow keys to highlight the
appropriate level and press
[

]
.
The following screen appears.
To enter the password, use the [

] or [

] arrow key to select each digit to be
changed and the [

] or [

] arrow keys to change the value of each number.
When the password number is correct, press
[

]
.
The following screen appears.
Note:
If you enter an incorrect password, the meter will not respond when you
press the check mark.
Display/ Lockout
Display Format
Program Review
Keypad Lockout
Program
Main Menu/Program
SIL User
Services
Factory
Gen User
]SAVE
Enter the password
9999
]MOVE
]QUIT
]MODE
]
]
]
]