GE PanaFlow HT, Руководство пользователя

Страница: 54 / 163

Chapter 3. Initial Setup and Programming
44 PanaFlow HT User’s Manual
3.6.2b Volumetric and Mass
To check and/or change actual volumetric flow units, under
UserPref/Flow Units
,
use the [

] or [

] arrow key to select
Volumetric (Actual)
and press
[

]
. The
following screen appears.
To remove Volumetric from the display menus, select
No
, press
[

]
. If change is
desired, select
Yes
, press
[

]
twice, and the following screen appears.
If no change is desired, press
[

]
and a screen similar to the following appears. To
change the measurement type, select the desired option, press
[

]
twice, and a
screen similar to the following appears.
If the highlighted units are correct, press [

] t
hree times and return to the
UserPref/Flow Units
menu. To change the units, use the [

] or [

] arrow key to
select the desired option, press
[

]
twice, and the display returns to the previous
screen. Press the
[

]
key twice to return to the
UserPref/Flow Units
screen.
Note:
Use the above procedure to check and/or change the standard volumetric (
Volumetric (Std)
) flow units and the
mass (
Mass
) flow units.