GE PanaFlow HT, Руководство пользователя

Страница: 47 / 163

PanaFlow HT User’s Manual 37
Chapter 3. Initial Setup and Programming
3.5.1 Display Format
To begin programming your meter, you must select the system units as discussed below. Refer to Figure 31 on page 93
and remember to record all programming data in Appendix F,
Data Records .
The
Display Format
submenu is used to set up the type of format to be used in representing information.
On the initial screen, use the arrow keys to highlight the lock symbol and press
[

]
.
The following screen appears.
Use the arrow keys to highlight
Display Format
and press
[

]
. The following
screen appears.
Use the [

] and [

] arrow keys to highlight the desired format setup and press
[

]
.
The window returns to the previous screen.
3.5.2 Keypad Lockout
To lock or unlock the keypad for security, on the
Main
menu, select
Keypad
Lockout
and press
[

]
. A
screen similar to the following appears.
To lock the display, press [

]or [

] to highlight
Lock
and press
[

]
and the screen
returns to the previous display.
To unlock the display, press [

] or [

] to highlight
Unlock
and press
[

]
and the
screen returns to the previous display.
Note:
When the keypad is locked, press
[

], [

], [

]
to open the password screen.
Then enter either a General User, SIL User, Service or Factory password to unlock.
Velocity
m/s
9.3
Main Menu
Display Format
Program
Program Review
Keypad Lockout
Display Format
Two Variable
Totalizer
One Variable
Main Menu
Display Format
Program
Program Review
Keypad Lockout
Lockout/ Keypad Lockout
Lock
Unlock