GE PanaFlow HT, Руководство пользователя

Страница: 40 / 163

Chapter 3. Initial Setup and Programming
30 PanaFlow HT User’s Manual
3.4.2 Changing Measurement Type for One or Two-Variable Screens
To change the measurement type:
From the display screen, press either the [

] or [

] buttons until the measurement
type is highlighted
Once the value is highlighted, press
[

]
to open the
Display/Measurement Type
option.
The screen changes to
Display/Measurement Type
. Press the [

] and [

] buttons to
scroll to the appropriate parameter. Available parameters include: velocity, volumetric
(actual) and volumetric (standard), mass, batch and inventory total, soundspeed,
KFactor, Reynolds number, and diagnostics. Once you have chosen the type, press
[

]
t
o select the value, and then [

] again to confirm the selection or
[

] t
o cancel the
selection.
Note:
To select a particular measurement unit, go to “Flow Units” on page 43.
Table 1: Available Parameters and Units
Parameter Units Metric Unit Imperial
Velocity m/s meters/sec ft/s feet/sec
Volumetric (Actual) L/S Liters per Second GAL/S Gallons per Second
L/M Liters per Minute GAL/M Gallons per Minute
L/H Liters per Hour GAL/H Gallons per Hour
ML/D Mega Liters per Day GAL/D Gallons per Day
m3/S Cubic Meter per Second ft3/S Cubic Feet per Second
m3/M Cubic Meter per Minute ft3/M Cubic Feet per Minute
m3/H Cubic Meter per Hour ft3/H Cubic Feet per Hour
m3/D Cubic Meter per Day ft3/D Cubic Feet per Day
BBL/S Barrels per Second BBL/S Barrels per Second
BBL/M Barrels per Minute BBL/M Barrels per Minute
BBL/H Barrels per Hour BBL/H Barrels per Hour
m/s
10.5
Velocity
m/s
10.5
Velocity
Velocity
Display/Measurement Type
Volumetric (Actual)
Volumetric (Std)
Mass