GE PanaFlow HT, Руководство пользователя

Страница: 44 / 163

Chapter 3. Initial Setup and Programming
34 PanaFlow HT User’s Manual
3.4.3 Changing Measurement Type or Value for Totalizer Screens (cont.)
To change the totalizer measurement type:
From the display screen, press either the [

] or [

] buttons until the measurement
type is highlighted.
Once the value is highlighted, press
[

]
to open the
Display/Measurement Type
option.
The screen changes to
Display/Measurement Type
. Press the [

] and [

] buttons to
scroll to the appropriate parameter. Available parameters include: Forward Batch (Fwd
Batch), Reverse Batch (Rev Batch), Mass Batch and Batch Time. Once you have
chosen the type, press
[

]
to select the value, and then [

] again to confirm the
selection or
[

] t
o cancel the selection.
If you select
Batch Time
, you can also select the time measurement units: seconds, minutes, hours or days. To choose
the appropriate unit, from the highlighted measurement type, press the [

] or [

] buttons until the measurement unit is
highlighted.
Once the unit is highlighted, press
[

] t
o open the
Display/Measurement Unit
option.
Press the [

] and [

] buttons to scroll to the appropriate unit, and press
[

] t
o select
the unit, and then [

] again to confirm the selection or
[

] t
o cancel the selection.
Note:
If you have selected “Batch Time,” the available units are seconds, minutes,
hours and days.
Total m^3
Fwd Batch 0.00
E0
Rev Batch 0.00
Total m^3
Fwd Batc h 0.00
E0
Rev Batch 0.00
Forward Batch
Display/Measurement Type
Reverse Batch
Net Batch
Batch Time
Total m^3
Batch Time 0.00
E0
Rev Batch 0.00
m^3
Display/Unit
ft^3
GAL
MGAL