manualshive.com logo in svg

GE Mark VIeS, Системное руководство

GE Mark VIeS - это передовая система управления оборудованием, предлагающая широкий спектр функций для эффективной работы. Вы можете бесплатно скачать System Manual для этого продукта на manualshive.com. Наслаждайтесь удобством и производительностью с GE Mark VIeS.

Поделиться
Скачать
background image

10

PDM Power Distribution Modules

10.1

Power Distribution Overview

The Power Distribution Modules (PDM) are designed specifically for the Mark control systems. The term PDM is used as a
name for all of the individual pieces forming the power distribution for a control system. The PDM uses individual boards to
accept and condition primary control power inputs of 125 V dc, 48 V dc, 24 V dc, and 100 to 250 V ac for use in redundant
combinations. Applied power is distributed to system terminal boards for use in field circuits and converted to 28 V dc for
operation of the Mark VIeS I/O modules. The PDM is divided into two different categories: core and branch.

Core distribution circuits are a portion of the PDM serving as the primary power management for a cabinet or series of
cabinets. Input power from one or more sources is received by a corresponding module or board. The power is distributed to
terminal boards and one or more bulk power supplies producing 28 V dc power to operate the control electronics. The 28 V
power is monitored and distributed by one or more 28 V output boards.

The 28 V dc control power output boards (JPDS and JPDG) can host an IS420PPDAH1B I/O pack to provide power system
feedback. Ribbon cables can daisy chain other core boards in the system to the board holding the PPDA. Complete
monitoring and system feedback sets this power system apart from conventional methods of power distribution. Bulk power
supplies are considered a part of the core PDM system.

Branch circuit boards split the power output from the PDM core components into individual ac and dc circuits for use in the
cabinets. Elements receiving power from the branch circuits provide their own power status feedback signals to the control
system. Branch circuit elements are usually single circuit boards. Branch circuits do not connect to the PPDA I/O pack for
system feedback.

Note

For more information, refer to the

Mark VIeS Functional Safety Control Systems Power Distribution Modules (PDM)

Application Guide for General Market

(GEI-100861) and the

Mark VIe Power Distribution Module Summary Sheet

(GEI-100870).

10.1.1

Core Components

The following core components have primary control power inputs of 125 V dc, or 24 V dc:

•

IS410JPDE

24/48 V dc input board mounts on a sheet metal structure. Power input is accepted from a battery and two dc

power supplies. An optional dc circuit breaker and filter are available for use with a battery power source. The JPDE
board distributes the dc power to terminal boards and other loads. In small systems, JPDE can be used between a battery
and 150 W dc power supplies. The JPDE board uses ribbon cable connections for system feedback through the PPDA,
including dc bus voltage, ground fault detection, and individual branch circuit status.

•

IS410JPDG

provides distribution of 28 V dc (control power) and 48 V or 24 V dc (wetting power) to other boards within

the control system. For both control and wetting power, the JPDG supports dual redundant power supply inputs through
external diodes. JPDG provides fuse protection for all 28 V dc and 24/48 V dc outputs. The PPDA I/O pack mounts on
the JPDG board.

For wetting power distribution, the JPDG is able to operate at either 24 V dc or 48 V dc. The JPDG supports a floating dc bus
for wetting power that is centered on earth by using resistors. It provides voltage feedback through the PPDA to detect system
ground faults, and integrates into the PDM system feedback. JPDG can support sensing and diagnostic for two ac signals,
which are distributed outside this board.

•

IS410JPDS

28 V dc control power output board mounts on a sheet metal structure. The JPDS circuit board contains three

independent 28 V dc power buses with one bulk power supply input for each bus. Barrier screw terminals connect the
power buses when a single bus with multiple supplies is desired. Output circuits from JPDS do not contain fuses with the
exception of three auxiliary circuits.

PDM Power Distribution Modules

GEH-6855_Vol_II System Guide 301

Public Information

Содержание Mark VIeS







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Mark VIeS

Data I/O PSV5000 Operator'S Manual preview
PSV5000
Бренд: Data I/O Страницы: 88
Data Aire dap4 touch Protocol Manual preview
dap4 touch
Бренд: Data Aire Страницы: 13
FAAC E604 Manual For The Installer preview
E604
Бренд: FAAC Страницы: 60
FAAC E124 Quick Start Manual preview
E124
Бренд: FAAC Страницы: 12
FAAC E124 Original Instructions Manual preview
E124
Бренд: FAAC Страницы: 44
FAAC E045 Manual preview
E045
Бренд: FAAC Страницы: 44
FAAC 844 MPSR Installation Instruction preview
844 MPSR
Бренд: FAAC Страницы: 8
FAAC B614 Manual preview
B614
Бренд: FAAC Страницы: 60
FAAC 739 Installation Manual preview
739
Бренд: FAAC Страницы: 14
FAAC B614 Instruction Manual preview
B614
Бренд: FAAC Страницы: 68
FAAC 455 D Supplemental Installation Instructions preview
455 D
Бренд: FAAC Страницы: 16
Parkside PDWE 8 A2 Operation And Safety Notes Translation Of The Original Instructions preview
PDWE 8 A2
Бренд: Parkside Страницы: 65
Waterway NEO 1200 Instruction Manual preview
NEO 1200
Бренд: Waterway Страницы: 8
Parker P33 Integration Manual preview
P33
Бренд: Parker Страницы: 54
RAM RP2000 User Manual preview
RP2000
Бренд: RAM Страницы: 71
Belden GRASS VALLEY MDX-3901 Manual To Installation And Operation preview
GRASS VALLEY MDX-3901
Бренд: Belden Страницы: 45
Osram OT EASY 32 CC Fitting Instructions preview
OT EASY 32 CC
Бренд: Osram Страницы: 3
KanDao Meeting Ultra Manual preview
Meeting Ultra
Бренд: KanDao Страницы: 265

Бренды по названию

Популярные бренды

Загрузить еще бренды