GE H49021AA, Базовое руководство по обслуживанию

Страница: 60 / 420

GE M
EDICAL
S
YSTEMS
D
IRECTION
5184024-100, R
EVISION
5 LOGIQ
WORKS
B
ASIC
S
ERVICE
M
ANUAL
2-14 Section 2-3 - Facility Needs
2-3-4 Networking Pre-installation Requirements
2-3-4-1 LOGIQworks Connected to a Network
Supported networks:
• 10 or 100 Megabit Network can be used.
2-3-4-2 Stand Alone Network or Integrated into Hospital’s Network
If LOGIQworks is to be used in a separate network together with a LOGIQ 9 or LOGIQ 7 and a network
printer with no connection to the Hospital’s network or LOGIQworks is to be on the Hospital network
either the predefined factory settings should be used.
2-3-4-3 DICOM Network Option Pre-Installation Requirements
To configure the LOGIQworks to work with other network connections, the site’s network administrator
must provide information to complete the Data Collection Document on
page 14 . Ensure that there are
no spaces in any field of the form except for those fields under PHYSICAL LOCATION. Entries must
include:
• Verify that there is a Conformancy Statement that documents the DICOM server you are about to
use supports Ultrasound images.
• A host name, local port number, AE Title, IP address and Net Mask for the LOGIQworks.
• The IP addresses for the default gateway and other routers at the site for ROUTING
INFORMATION.
• The host name, IP address, port and AE Title for each device the site wants connected to the
LOGIQworks
for DICOM APPLICATION INFORMATION. Fields for Description, Institution Name,
Institution Department Name and Station Name are also available to describe the sending devices
in more detail. This information may be useful for error solving.
2-3-4-4 Insite 2
For Insite 2 a connection to the internet is required.
Recommendation: A permanent broadband to the internet. The customer is responsible for the
connectivity, configuration and operation of this internet access funktionality.