GE H49021AA, Базовое руководство по обслуживанию

Страница: 226 / 420

GE M
EDICAL
S
YSTEMS
D
IRECTION
5184024-100, R
EVISION
5 LOGIQ
WORKS
B
ASIC
S
ERVICE
M
ANUAL
3-160 Section 3-5 - Configuration
3-5-6-1 General
(cont’d)
•
Pipe Name:
Name of the pipe on which clients can connect with the Database Service.
•
Import priority:
The priority with which incoming items are imported into the database.
•
Performance monitoring:
Creates a log (DBS_Performance.log) of RadWorks' performance. The
name of the log is DBS_Performance.log and it is stored in the RadStore log directory
(X:\AMI_61\LOG).
3-5-6-2 Logging
To set and view RadWorks' logging properties:
1.) Select
Configuration
>
Database Service...
from the Data Selector menu.
2.) Select the Logging tab from the Database Service Properties page.
•
Logging Level:
Set the level of logging messages. If set to ALL, all messages will be logged. If set
to NORMAL (the typical setting) only error messages will be logged.
•
Logging Type:
Set the types of logging used by the RadWorks application. (Default: file)
-
File:
If this check box is checked, RadWorks will write general information about its operation
to the RadWorks.log file, which you can view in the Log folder.
-
Pipe:
Used in combination with the listening tool in the X:\AMI_61\bin folder. Among other
things, it enables you to observe DICOM transmissions in a pipe. Consult the technical
reference manual or contact technical support for additional information.
-
Console:
If this check box is checked, RadWorks will display a window that continuously
shows the actions RadWorks is performing. This is useful when troubleshooting.
•
Log File:
Set the name of the log file. Each Service has its own default log filename.
Figure 3-135 Database Service Properties - Logging (Default Settings)
Administrator
only