GE FGC TLE Series, Руководство пользователя

Страница: 12 / 509

12
LP33 Series II UPS | www.gecriticalpower.com
GE Data Protection software can communicate with the UPS
over RS-232, USB or SNMP to receive status information and
measurement values of the UPS. In case of a critical condition
(time on battery, remaining battery autonomy time or low battery)
for the load, the software starts a controlled shutdown. An
enhanced alarm management system provides the
possibility to start applications and send messages and
e-mails for every upcoming or disappearing alarm.
GE’s iUPSGuard is a cloud based remote monitoring solution for UPS,
providing status monitoring and alarm notification that supports
all GE UPS product lines, anytime, anywhere. iUPSGuard notifies
personnel of critical alarms and events via email or SMS, allowing a
user or GE technician to make timely decisions on critical conditions.
With comprehensive data collection and analysis iUPSGuard is not
only a remote monitoring & diagnostics (RM&D) system, but the
core of the integrated service offering GE Power Diagnostics.
• 24x7 monitoring of UPS status and operating parameters, alarms
notification through email and SMS
• Highly secure and efficient data transmission, SSL encrypted with
unidirectional communication
• iUPSGuard can communicate through various channels and monitors
single UPS or parallel UPS systems through web/SNMP card
• Detailed reporting system of iUPSGuard provides valuable information on
equipment operating conditions and trends over period of time
• Predictive algorithm to anticipate issues
UPS Module Status/Alarm Monitoring
iUPSGuard Diagnostic Monitoring
TLE UPS System - Monitoring & Connectivity
SBM is a comprehensive and programmable management and
monitoring system that protects the UPS battery string life. Batteries
are prevented from overcharging and deep discharging.
• During UPS startup, the SBM is programmed with specific battery information.
• Calculates true battery autonomy and remaining battery backup time during utility
outage.
• Measures the volts per cell of the battery system and compensates for
temperature and load.
• Programmable features allow the user to select the frequency and type of battery
tests that are performed. Frequency range can be from once per week to annually.
Test type range can be from deep cycle to 3-min discharges.
• All tests logged in the UPS events menu and any failure is reported.
• All tests done automatically with the UPS on-line. Manual tests can be performed
at any time.
Battery Plant Monitoring Via GE SBM System
Internet