GE C30 Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 416

GE C30 Скачать руководство пользователя страница 124

4-24

C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL

FRONT PANEL INTERFACE

CHAPTER 4: INTERFACES

4

•

Small-bladed knife

To create custom LED labels for the enhanced front panel display:
1.

Start the EnerVista UR Setup software.

2.

Select the

Front Panel Label Designer

item from the Online Window or Offline Window area, for example under

Settings > Front Panel Label Designer

. If the option does not display, it means that the C30 does not have an

enhanced front panel or that no customization is possible. The Online Window has the advantage of displaying the
live fields as opposed to blank fields.
The window displays.

Figure 4-26: Front panel label designer window

3.

Enter the text to appear next to each LED and above each user-programmable pushbutton in the fields provided. The

LED Offsets

and

Button Offsets

buttons move all labels left/right and up/down on the page (they both do the same

action, so use either button). The

Button Offsets

button does not display when there are no pushbuttons to customize.

4.

Feed the UR front panel label cutout sheet into a printer and press the

Print

button in the front panel report window.

5.

When printing is complete, fold the sheet along the perforated lines and punch out the labels.

6.

Remove the UR label insert tool from the package and bend the tabs as described in the following procedures. These
tabs are used for removal of the default and custom LED labels.

The label package shipped with every C30 contains the three default labels, the custom label template sheet, and the label
removal tool.
If the default labels are suitable for your application, insert them in the appropriate slots and program the LEDs to match
them. If you require custom labels, use the following procedures to remove the original labels and insert the new ones.

Use the tool EXACTLY as outlined as follows, with the printed side containing the GE part number facing the user.

«
...
122
123
124
125
126
...
»

Содержание C30

































































































































































































































































































































































































































Отзывы:

Нет отзывов