manualshive.com logo in svg

GE C30, Инструкция по эксплуатации, Страница: 118 / 416

Поделиться
Скачать
GE C30 Скачать руководство пользователя страница 118

4-18

C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL

FRONT PANEL INTERFACE

CHAPTER 4: INTERFACES

4

Two methods of editing and storing a numerical setting value are available.
•

0 to 9 and decimal point

 — The relay numeric keypad works the same as a calculator. A number is entered one digit at 

a time. The leftmost digit is entered first and the rightmost digit is entered last. Pressing the 

MESSAGE

 left arrow or 

pressing the 

ESCAPE

 key, returns the original value to the display.

•

VALUE keys

 — The 

VALUE

 up arrow increments the displayed value by the step value, up to the maximum value 

allowed. While at the maximum value, pressing the 

VALUE

 up arrow again allows the setting selection to continue 

upward from the minimum value. The 

VALUE

 down arrow decrements the displayed value by the step value, down to 

the minimum value. While at the minimum value, pressing the 

VALUE

 down arrow again allows the setting selection to 

continue downward from the maximum value.

4.2.5.2  Entering enumeration data

Enumeration settings have data values that are part of a set, whose members are explicitly defined by a name. A set has 
two or more members.

Enumeration type values are changed using the 

VALUE

 keys. The 

VALUE

 up arrow displays the next selection while the 

VALUE

 down arrow displays the previous selection.

4.2.5.3  Entering alphanumeric text

Text settings have data values that are fixed in length, but user-defined in characters. They can be upper-case letters, 
lower-case letters, numerals, and a selection of special characters.
There are several places where text messages can be programmed to allow the relay to be customized for specific 
applications. One example is the Message Scratchpad. Use the following procedure to enter alphanumeric text messages.
For example, enter the text “Breaker #1”.
1.

Press the decimal point to enter text edit mode.

2.

Press the 

VALUE

 keys until the character 'B' appears; press the decimal key to advance the cursor to the next position.

3.

Repeat step 2 for the remaining characters: r,e,a,k,e,r, ,#,1.

4.

Press 

ENTER

 to store the text.

5.

If you have any problem, press 

HELP

 to view context sensitive help. Flash messages appear sequentially for several 

MINIMUM: 0.5

MAXIMUM: 10.0

Press the 

HELP

 key to view the minimum and maximum values. Press the key again to view the 

next context sensitive help message.

FLASH MESSAGE

TIME: 2.5 s

As an example, set the flash message time setting to 2.5 seconds. Press the appropriate numeric 

keys in the sequence “2 . 5". The display message changes as the digits are being entered.

NEW SETTING

HAS BEEN STORED

Until 

ENTER

 is pressed, editing changes are not registered by the relay. Press 

ENTER

 to store the 

new value in memory. This flash message momentarily appears as confirmation of the storing 

process. Numerical values that contain decimal places are rounded-off if more decimal place digits 

are entered than specified by the step value.

ACCESS LEVEL:

Restricted

For example, the selections available for 

ACCESS LEVEL

 are "Restricted," "Command," "Setting," and 

"Factory Service."

ACCESS LEVEL:

Setting

If the 

ACCESS LEVEL

 needs to be "Setting," press the 

VALUE

 keys until the proper selection displays. 

Press 

HELP

 at any time for the context sensitive help messages.

NEW SETTING

HAS BEEN STORED

Changes are not registered by the relay until the 

ENTER

 key is pressed. Pressing 

ENTER

 stores the 

new value in memory. This flash message momentarily appears as confirmation.

Содержание C30

































































































































































































































































































































































































































Отзывы:

Нет отзывов