manualshive.com logo in svg

GE C30, Инструкция по эксплуатации, Страница: 122 / 416

Поделиться
Скачать
GE C30 Скачать руководство пользователя страница 122

4-22

C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL

FRONT PANEL INTERFACE

CHAPTER 4: INTERFACES

4

The user-programmable LEDs consist of 48 amber LED indicators in four columns. The operation of these LEDs is user-
defined. Support for applying a customized label beside every LED is provided. Default labels are shipped in the label 
package of every C30, together with custom templates. The default labels can be replaced by user-printed labels.
User customization of LED operation is of maximum benefit in installations where languages other than English are used 
to communicate with operators. See the User-Programmable LEDs section in chapter 5 for the settings used to program 
the operation of the LEDs on these panels.

4.2.7.2  Standard faceplate

The standard faceplate consists of three panels with LED indicators, keys, and a communications port. The 

RESET

 key is 

used to reset any latched LED indicator or target message, once the condition has been cleared (these latched conditions 
can also be reset via the 

SETTINGS 



 INPUT/OUTPUTS 



 RESETTING

 menu). The RS232 port is for connection to a 

computer.
The 

USER

 keys are used by the breaker control feature.

Figure 4-24: LED panel 1

Status indicators

•

IN SERVICE

 — Indicates that control power is applied, all monitored inputs/outputs and internal systems are fine, the 

relay has been programmed

•

TROUBLE

 — Indicates that the relay has detected an internal problem

•

TEST MODE

 — Indicates that the relay is in test mode. For more information, see the Test Mode section in the Settings 

chapter.

•

TRIP

 — Indicates that the selected FlexLogic operand serving as a Trip switch has operated. This indicator always 

latches; the reset command must be initiated to allow the latch to be reset.

•

ALARM

 — Indicates that the selected FlexLogic operand serving as an Alarm switch has operated. This indicator is 

never latched.

•

PICKUP

 — Indicates that an element is picked up. This indicator is never latched.

Event-cause indicators

Event-cause LEDs are turned on or off by protection elements that have their respective target setting selected as either 
“Enabled” or “Latched.” If a protection element target setting is “Enabled,” then the corresponding event cause LEDs 
remain on as long as operate the operand associated with the element remains asserted. If a protection element target 
setting is “Latched,” then the corresponding event cause LEDs turn on when the operate operand associated with the 
element is asserted and remain on until the 

RESET

 button on the front panel is pressed after the operand is reset.

All elements that are able to discriminate faulted phases can independently turn off or on the phase A, B, or C LEDs. This 
includes phase instantaneous overcurrent, phase undervoltage, and so on. This means that the phase A, B, and C operate 
operands for individual protection elements are ORed to turn on or off the phase A, B, or C LEDs.
•

VOLTAGE

 — Not used

Содержание C30

































































































































































































































































































































































































































Отзывы:

Нет отзывов