Step
Action
3
Connect the two optical fiber cables for UV sensor, AE-131 (D)
NOTICE
Do not overbend the optical fiber cables for the UV sen-
sor. This can result in the optical fibers breaking.
A
E
D
F
G
4
Connect the pH and temperature sensor, AE-121/TE-121 (E).
Note:
Enter the pH calibration values on the sensor label. When using UNICORN,
enter the values under System Settings.
For other control software, refer to the information provided in the docu-
mentation package.
5
Connect the temperature and conductivity sensor, CE-102/TE-102 (F).
6
Connect the air sensor, AE-152 (G).
5 Preparation
5.2 Install disposable flow kits
ÄKTA ready XL Operating Instructions 29281616 AE
121
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***