NOTICE
Operator console
•
Do not use the operator console to push or drag the system
•
Do not lean on the console
The console arm is only designed to support the weight of the op-
erator console.
The operator console is packed separately in a cardboard box that is enclosed in the
system crate.
All signal connections to and from the touchscreen monitor and the keyboard (DVI
signal and USB connection) are included in one multi-conductor cable (ODU minis-
nap 24-pin connector). One ODU minisnap 3-pin connector is used for power supply
to the touchscreen monitor.
These two cables are attached to the system located on the front of the system.
Assemble the operator console
(optional)
For this procedure two people working together are recommended due to the opera-
tor console weight.
Follow the instruction below to fit the operator console.
Note:
The image in this section does not reflect the actual system delivered, but is
provided for illustrative purpose.
Step
Action
1
Open the box and remove the assembled console. Do not remove the foam
protection. The foam protection can be used for lifting.
4 Installation
4.3 Setup
4.3.1 Assembly
88
ÄKTA ready XL Operating Instructions 29281616 AE
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
