manualshive.com logo in svg

GE Multilin L60, Инструкция по эксплуатации

У нас есть бесплатное руководство пользователя и установки для продукта N1C L60. Вы можете скачать его с нашего сайта manualshive.com. Получите подробные инструкции по использованию и установке этого товара, чтобы сделать процесс еще проще и удобнее.

Поделиться
Скачать
background image

GE Multilin

L60 Line Phase Comparison System

5-307

5 SETTINGS

5.7 INPUTS/OUTPUTS

5

VIRTUAL OUTPUT 1 ID:

 "Trip"

VIRTUAL OUTPUT 1 EVENTS:

 "Disabled"

5.7.5 REMOTE DEVICES

a) REMOTE INPUTS/OUTPUTS OVERVIEW

Remote inputs and outputs provide a means of exchanging digital state information between Ethernet-networked devices.
The IEC 61850 GSSE (Generic Substation State Event) and GOOSE (Generic Object Oriented Substation Event) stan-
dards are used.

The sharing of digital point state information between GSSE/GOOSE equipped relays is essentially an extension to Flex-
Logic, allowing distributed FlexLogic by making operands available to/from devices on a common communications net-
work. In addition to digital point states, GSSE/GOOSE messages identify the originator of the message and provide other
information required by the communication specification. All devices listen to network messages and capture data only from
messages that have originated in selected devices.

IEC 61850 GSSE messages are compatible with UCA GOOSE messages and contain a fixed set of digital points. IEC
61850 GOOSE messages can, in general, contain any configurable data items. When used by the remote input/output fea-
ture, IEC 61850 GOOSE messages contain the same data as GSSE messages.

Both GSSE and GOOSE messages are designed to be short, reliable, and high priority. GOOSE messages have additional
advantages over GSSE messages due to their support of VLAN (virtual LAN) and Ethernet priority tagging functionality.
The GSSE message structure contains space for 128 bit pairs representing digital point state information. The IEC 61850
specification provides 32 “DNA” bit pairs that represent the state of two pre-defined events and 30 user-defined events. All
remaining bit pairs are “UserSt” bit pairs, which are status bits representing user-definable events. The L60 implementation
provides 32 of the 96 available UserSt bit pairs.

The IEC 61850 specification includes features that are used to cope with the loss of communication between transmitting
and receiving devices. Each transmitting device will send a GSSE/GOOSE message upon a successful power-up, when
the state of any included point changes, or after a specified interval (the 

default update

 time) if a change-of-state has not

occurred. The transmitting device also sends a ‘hold time’ which is set greater than four times the programmed default time
required by the receiving device.

Receiving devices are constantly monitoring the communications network for messages they require, as recognized by the
identification of the originating device carried in the message. Messages received from remote devices include the mes-
sage 

time allowed to live

. The receiving relay sets a timer assigned to the originating device to this time interval, and if it

has not received another message from this device at time-out, the remote device is declared to be non-communicating, so
it will use the programmed default state for all points from that specific remote device. If a message is received from a
remote device before the 

time allowed to live

 expires, all points for that device are updated to the states contained in the

message and the hold timer is restarted. The status of a remote device, where “Offline” indicates non-communicating, can
be displayed.

The remote input/output facility provides for 32 remote inputs and 64 remote outputs.

b) LOCAL DEVICES: DEVICE ID FOR TRANSMITTING GSSE MESSAGES

In a L60 relay, the device ID that represents the IEC 61850 GOOSE application ID (GoID) name string sent as part of each
GOOSE message is programmed in the 

SETTINGS 

 PRODUCT SETUP 



 COMMUNICATIONS 



 IEC 61850 PROTOCOL 

GSSE/GOOSE CONFIGURATION 

 TRANSMISSION 



 FIXED GOOSE 



 GOOSE ID

 setting.

Likewise, the device ID that represents the IEC 61850 GSSE application ID name string sent as part of each GSSE mes-
sage is programmed in the 

SETTINGS 

 PRODUCT SETUP 



 COMMUNICATIONS 



 IEC 61850 PROTOCOL 

 GSSE/GOOSE

CONFIGURATION 

 TRANSMISSION 



 GSSE 



 GSSE ID

 setting.

In L60 releases previous to 5.0x, these name strings were represented by the 

RELAY NAME

 setting.

Содержание L60

















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для L60

Hama DM-20 Operating Instructions Manual preview
DM-20
Бренд: Hama Страницы: 38
Icom IC-7000 Modification Instruction preview
IC-7000
Бренд: Icom Страницы: 8
Icom IC-M400BB Instructions Manual preview
IC-M400BB
Бренд: Icom Страницы: 6
Nady Systems ENCORE DUET Manual preview
ENCORE DUET
Бренд: Nady Systems Страницы: 10
Nady Systems RSM-2 User Giude preview
RSM-2
Бренд: Nady Systems Страницы: 2
Nady Systems CM 95 User Manual preview
CM 95
Бренд: Nady Systems Страницы: 2
Nady Systems 401X Quad User Manual preview
401X Quad
Бренд: Nady Systems Страницы: 19
ZETRON 30 Worldpatch Instruction Manual preview
30 Worldpatch
Бренд: ZETRON Страницы: 60
Orchid Telecom KS 416 System Administration Manual preview
KS 416
Бренд: Orchid Telecom Страницы: 25
Takstar E-340 Quick Start Manual preview
E-340
Бренд: Takstar Страницы: 2
CAD Audio GXLD2QM Owner'S Manual preview
GXLD2QM
Бренд: CAD Audio Страницы: 3
Entel EA19 Quick Start User Manual preview
EA19
Бренд: Entel Страницы: 4
Technics st-ch510 Service Manual preview
st-ch510
Бренд: Technics Страницы: 14
Burmester 151 Musiccenter Short Operating Instructions preview
151 Musiccenter
Бренд: Burmester Страницы: 20
WOXTER Mic Studio 100 Pro User Manual preview
Mic Studio 100 Pro
Бренд: WOXTER Страницы: 8
Boss Rebel ATV22CB User Manual preview
Rebel ATV22CB
Бренд: Boss Страницы: 2
Dynaudio DA-BM15A Owner'S Manual preview
DA-BM15A
Бренд: Dynaudio Страницы: 6
Panasonic SA-AK770 Operating Instructions Manual preview
SA-AK770
Бренд: Panasonic Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды