manualshive.com logo in svg

GE Multilin L60, Инструкция по эксплуатации

У нас есть бесплатное руководство пользователя и установки для продукта N1C L60. Вы можете скачать его с нашего сайта manualshive.com. Получите подробные инструкции по использованию и установке этого товара, чтобы сделать процесс еще проще и удобнее.

Поделиться
Скачать
background image

GE Multilin

L60 Line Phase Comparison System

5-187

5 SETTINGS

5.5 GROUPED ELEMENTS

5

nite (the actual trip may be delayed as per the 

TRIP MODE

 setting). Therefore, this angle must be selected in consider-

ation to the power swing angle beyond which the system becomes unstable and cannot recover.

The inner characteristic is also used by the power swing blocking function in the two-step mode. In this case, set this
angle large enough so that the characteristics of the distance elements are safely enclosed by the inner characteristic.
This setting applies to mho shapes only.

•

POWER SWING OUTER

, 

MIDDLE

, and

 INNER RGT BLD

: These settings specify the resistive reach of the right

blinder. The blinder applies to both “Mho” and “Quad” characteristics. Set these value high if no blinder is required for
the “Mho” characteristic.

•

POWER SWING OUTER

, 

MIDDLE

, and 

INNER LFT BLD

: These settings specify the resistive reach of the left blinder.

Enter a positive value; the relay automatically uses a negative value. The blinder applies to both “Mho” and “Quad”
characteristics. Set this value high if no blinder is required for the “Mho” characteristic.

•

POWER SWING PICKUP DELAY 1:

 All the coordinating timers are related to each other and should be set to detect

the fastest expected power swing and produce out-of-step tripping in a secure manner. The timers should be set in
consideration to the power swing detect characteristics, mode of power swing detect operation and mode of out-of-
step tripping. This timer defines the interval that the impedance locus must spend between the outer and inner charac-
teristics (two-step operating mode), or between the outer and middle characteristics (three-step operating mode)
before the power swing blocking signal is established. This time delay must be set shorter than the time required for
the impedance locus to travel between the two selected characteristics during the fastest expected power swing. This
setting is relevant for both power swing blocking and out-of-step tripping.

•

POWER SWING RESET DELAY 1:

 This setting defines the dropout delay for the power swing blocking signal. Detec-

tion of a condition requiring a block output sets latch 1 after 

PICKUP DELAY 1

 time. When the impedance locus leaves

the outer characteristic, timer 

POWER SWING RESET DELAY 1

 is started. When the timer times-out the latch is reset. This

setting should be selected to give extra security for the power swing blocking action.

•

POWER SWING PICKUP DELAY 2:

 Controls the out-of-step tripping function in the three-step mode only. This timer

defines the interval the impedance locus must spend between the middle and inner characteristics before the second
step of the out-of-step tripping sequence is completed. This time delay must be set shorter than the time required for
the impedance locus to travel between the two characteristics during the fastest expected power swing.

•

POWER SWING PICKUP DELAY 3:

 Controls the out-of-step tripping function only. It defines the interval the imped-

ance locus must spend within the inner characteristic before the last step of the out-of-step tripping sequence is com-
pleted and the element is armed to trip. The actual moment of tripping is controlled by the 

TRIP MODE

 setting. This time

delay is provided for extra security before the out-of-step trip action is executed.

•

POWER SWING PICKUP DELAY 4:

 Controls the out-of-step tripping function in “Delayed” trip mode only. This timer

defines the interval the impedance locus must spend outside the inner characteristic but within the outer characteristic
before the element is armed for the delayed trip. The delayed trip occurs when the impedance leaves the outer charac-
teristic. This time delay is provided for extra security and should be set considering the fastest expected power swing.

•

POWER SWING SEAL-IN DELAY:

 The out-of-step trip FlexLogic operand (

POWER SWING TRIP

) is sealed-in for the

specified period of time. The sealing-in is crucial in the delayed trip mode, as the original trip signal is a very short
pulse occurring when the impedance locus leaves the outer characteristic after the out-of-step sequence is completed.

•

POWER SWING TRIP MODE:

 Selection of the “Early” trip mode results in an instantaneous trip after the last step in

the out-of-step tripping sequence is completed. The early trip mode will stress the circuit breakers as the currents at
that moment are high (the electromotive forces of the two equivalent systems are approximately 180° apart). Selection
of the “Delayed” trip mode results in a trip at the moment when the impedance locus leaves the outer characteristic.
delayed trip mode will relax the operating conditions for the breakers as the currents at that moment are low. The
selection should be made considering the capability of the breakers in the system.

•

POWER SWING BLK: 

This setting specifies the FlexLogic operand used for blocking the out-of-step function only. The

power swing blocking function is operational all the time as long as the element is enabled. The blocking signal resets
the output 

POWER SWING TRIP

 operand but does not stop the out-of-step tripping sequence.

Содержание L60

















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для L60

Yamaha YVC-1000 User Manual preview
YVC-1000
Бренд: Yamaha Страницы: 98
Fender PA 135 Manual preview
PA 135
Бренд: Fender Страницы: 6
Contec IPC-CDD-02 User Manual preview
IPC-CDD-02
Бренд: Contec Страницы: 15
Shure PG27 Instruction Manual preview
PG27
Бренд: Shure Страницы: 58
Nady Systems DKW-3 Operating Instructions preview
DKW-3
Бренд: Nady Systems Страницы: 2
TONOR K380T User Manual preview
K380T
Бренд: TONOR Страницы: 18
thomann T.Bone TWS ONE VOCAL User Manual preview
T.Bone TWS ONE VOCAL
Бренд: thomann Страницы: 4
Fun Generation Satmix 2.1 PA system User Manual preview
Satmix 2.1 PA system
Бренд: Fun Generation Страницы: 32
Curtis RCD843 Instruction Manual preview
RCD843
Бренд: Curtis Страницы: 6
Curtis RCD877 Operation Manual preview
RCD877
Бренд: Curtis Страницы: 12
Curtis RCD888 Instruction Manual preview
RCD888
Бренд: Curtis Страницы: 13
Curtis SRCD-719 Instruction Manual preview
SRCD-719
Бренд: Curtis Страницы: 14
Curtis RCD881 Instruction Manual preview
RCD881
Бренд: Curtis Страницы: 15
Curtis RCD725C Instruction Manual preview
RCD725C
Бренд: Curtis Страницы: 16
WUNDER cm7 Manual preview
cm7
Бренд: WUNDER Страницы: 6
Saramonic Blink100 User Manual preview
Blink100
Бренд: Saramonic Страницы: 21
Samson Airline AM1 Owner'S Manual preview
Airline AM1
Бренд: Samson Страницы: 74
Teac MC-DX30 Owner'S Manual preview
MC-DX30
Бренд: Teac Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды